Will Krause » willkrause

Happy Valentine’s Day – 2012

willkrause — Tue, 14 Feb 2012 05:27:48 +0000

This year I worked with the lovely Mirella Toncheva to make a Valentine. She’s a total babe!

Some past Valentines are over here:
http://willkrause.com/2010/02/14/happy-valentines-day/
http://willkrause.com/2010/01/12/yearly-valentines-2004-2009/

Halloween Monster – 2011

willkrause — Fri, 03 Feb 2012 14:00:12 +0000

I needed to make a last-minute Halloween costume, so I glued together this mask from an old cardboard box, feathers leftover from a stork puppet I made a while back, and some felt, pipe cleaners, and – of course – a handful of plastic googly eyes.

Hamish and Andy – Racing Trash Cans

willkrause — Wed, 01 Feb 2012 14:00:00 +0000

I modified two trash cans with seats and little wheels so that they could compete in a slow and sneaky race in Central Park.

This prop was used in an Australian show called “Hamish and Andy’s Gap Year.”

Hamish and Andy – Giant Baby Carriage

willkrause — Mon, 30 Jan 2012 22:42:32 +0000

I made this giant baby carriage so that a grownup could fit inside. It uses heavyweight plywood, BMX wheels, and welded steel to support a big person. Katie Akana and Jessie Voris handled the fabric and upholstery, And Katie also served as test pilot for a race down the hallway of the woodshop.

This prop was used in an Australian show called “Hamish and Andy’s Gap Year.”

Rainbow Lamp – Brooklyn Childrens’ Museum

willkrause — Sun, 29 Jan 2012 14:00:19 +0000

I designed this lamp for a weather-themed lighting scheme for a FIT project set in the Brooklyn Childrens’ Museum. The idea of the lighting scheme is that lighting would be used to show weather changes – projectors would show animated clouds, and lightning would be simulated with strobe lights, among other effects. After the thunder and lightning passed through the space, this rainbow lamp would light up as sunlight returned to the space. The rainbow effect is created by shining light through a spectrum-gradient printed transparency, which lights acrylic rods. The rods are cut to different lengths so that different colors appear as bands at different heights.

Rubin Museum of Art

willkrause — Thu, 26 Jan 2012 14:52:04 +0000

I was part of a group of FIT students to redesign the lobby and second floor gallery at the Rubin Museum of Himalayan Art. One of the big challenges was that the Introduction to Himalayan Art exhibit on the second floor has two different entrances, each with two ways to start going through the exhibit. My plan was to create dividers to lead visitors through the content in the proper sequence.

Kikkerland Trade Show Counters

willkrause — Thu, 26 Jan 2012 01:07:38 +0000

I fabricated these two counters for Kikkerland’s 2012 trade shows. They both have lightbox faces made out of acrylic covered with adhesive vinyl. The client wanted the acrylic to go all the way to the edge of the counter, so the plastic was applied before the laminate, and then the laminate was applied over the edge. One of the counters has a top design to hold a computer. I built these counters for Abunch LLC.

Nipple Robot – Silent Library

willkrause — Mon, 19 Sep 2011 09:57:08 +0000

Someday many years from now, my grandkids will ask me “Grandpa, were you ever a television robot star?” And I will be able to honestly tell them “Yes children, I was an EVIL television robot star.

I built this robot out of all sorts of odds-and-ends. A funnel, bucket, two mini plasma spheres to make a head, and two wheelbarrows to make a body. The legs are made from wiggle board and plywood, and then I attached a bunch of wires and junk circuit boards… with plenty of silver paint to make things look futuristic.

Courtland Premo made a remote control base for the robot by dissecting a remote-control golf bag carrier.

It gets very hot in a robot costume!

Toe Snap – Silent Library

willkrause — Sat, 17 Sep 2011 13:00:44 +0000

I built this machine to sequentially shoot a contestant in the toes with rubber bands.

The mechanism works with screws which are placed around the barrel of a crank-operated winch every few degrees. As the crank is turned, the rubber bands fire off one-by-one.

Pedal Pop – Silent Library

willkrause — Fri, 16 Sep 2011 13:00:35 +0000

I built this five-passenger bike by cutting apart and welding together the parts from three tandem bikes, and adding a bit of black gas piping where I needed straight tubing. It actually worked too, and I was able to take it for some wobbly rides in the studio! (Though the rear seat was responsible for shifting gears, since my cables weren’t long enough.)

Inflatable hot water bottles were added to make exploding seats (by Jason Singleton and Jessie Voris, I think)