Category: Abunch LLC

Perforated Pedestals – Kikkerland – ICFF

Posted: 4 September, 2013-Likes: 0-Comments: 0-Categories: Museum/Exhibit Design, Abunch LLC-Tags: exhibit, fabrication, icff

For this year’s ICFF show, I made some new pedestals for Kikkerland so that they could be used with the long lighted counters that I had built the previous year. It was an interesting challenge to plan my cuts so that all of the perforated holes in the masonite surface would align on all of […]

Read more »

Mechanical Cupcake Dispenser for Jet Blue

Posted: 4 September, 2013-Likes: 0-Comments: 0-Categories: Museum/Exhibit Design, Abunch LLC-Tags: mechanisms, exhibit, design

I was called in to make a mechanized cupcake dispenser over a weekend for Jet Blue, to be set up in their JFK terminal. This was a challenging project because I needed to design a mechanism that would feed out the small plastic balls without accidentally crushing them. Also, the cupcake was not centered in […]

Read more »

Padded Columns for L’Oréal

Posted: 13 January, 2013-Likes: 0-Comments: 0-Categories: Museum/Exhibit Design, Abunch LLC-Tags: Props, willkrause, foam

I made these padded columns for a L’Oréal event so that they would fit around existing columns at the event site. Jessie Voris and I worked together on the upholstery – there were 200 buttons to sew!

Read more »

ABunch LLC – Twirly Milkshake Sign

Posted: 21 September, 2011-Likes: 0-Comments: 0-Categories: Museum/Exhibit Design, Abunch LLC

I made this giant rotating milkshake for a pie/milkshake merchant. The provided graphics were applied to gatorboard which I sandwiched around a signpost and then bulked-up with some polyurethane foam. The edge was painted white and covered with glitter. The base is plywood and contains a drill motor, which spins the giant milkshake!

Read more »

Kikkerland Trade Show Counters

Posted: 25 January, 2012-Likes: 0-Comments: 0-Categories: Museum/Exhibit Design, Abunch LLC-Tags: Props, willkrause, Furniture

I fabricated these two counters for Kikkerland’s 2012 trade shows. They both have lightbox faces made out of acrylic covered with adhesive vinyl. The client wanted the acrylic to go all the way to the edge of the counter, so the plastic was applied before the laminate, and then the laminate was applied over the […]

Read more »

Puppet Stage for Miss Piggy!

Posted: 10 September, 2011-Likes: 0-Comments: 0-Categories: Abunch LLC-Tags: critters, puppets, puppet

I built this puppet stage for Opening Ceremony’s event at Fashion’s Night Out. It was built over a long weekend out of plywood, MDF, yards of black and red velvet, and lots of Christmas lights! Andrew Bunch helped me with painting and assembly, and sewing magnets to the curtains so that they would close nicely, […]

Read more »